TM 9-6115-668-13
5.49 SYNCHRONOUS GENERATOR SHOCK ABSORBERS MAINTENANCE.
This task covers:
a. Removal
b. Installation
Tools
Equipment Conditions
General Mechanic’s Tool Kit
Reference
(item 2, appendix B)
Generator Set 150 kW shut
Automotive Fuel and Electrical System Repair, Tool Kit
down,
(item 3, appendix B)
paragraph 2.5.2
Materials/Parts
Personnel Required
Loctite 243
Two
item 16, appendix E)
Lubricant
(item 6, appendix E)
W A R N I N G
Disconnect the negative battery cable first and then the positive
battery terminal cables. Failure to observe this warning could re-
suit in severe personal injury or death.
W A R N I N G
Engine and generator shock mounts are not repairable. Do not
attempt to disassemble. Failure to comply may cause injury or
death.
Do not stand in the operating area of the crane or forklift. Failure
to observe these warnings could result in severe personal injury
or death.
C A U T I O N
Engine should be lifted only far enough so that the engine mount
can be removed. Equipment will be damaged if the engine is lifted
too high.
Suitable spacing must be provided when engine shock absorbers
are removed. Failure to provide proper support to the engine will
cause damage to the equipment. The engine must be supported on
the engine mounts.
5 - 2 2 0
