TM 9-6115-338-13
5.50
DIESEL ENGINE MAINTENANCE.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
General Mechanic’s Tool Kit
(item 2, appendix B)
Automotive Fuel and Electrical System Repair, Tool Kit
(item 3, appendix B)
Eyebolts
(item 17,18 appendix B)
Load bank (item 19, appendix B)
Equipment Conditions
Reference
Generator Set 150 kW shut
down
paragraph 2.5.2
Materials/Parts
Loctite 243
(item 16, appendix E)
Cable ties
(item 10, appendix E)
Lubricant
(item 6, appendix E)
Plastic bags
(item 21, appendix E)
Rubber bands
(item 22, appendix E)
Personnel required
Two
Disconnect the negative battery cable first and then the positive battery termi-
nal cables. Failure to observe this warning could result in severe personal injury
or death.
Engine and generator shock mounts are not repairable. Do not attempt to
disassemble. Failure to comply may cause injury or death.
Do not stand in the operating area of the crane or forklift. Failure to observe
these warnings could result in severe personal injury or death.
NOTE
To prevent contamination, bag the ends of ail fuel and oil lines when removed
with plastic bags and rubber bands.
1.
Remove unit hood assembly (1, figure 5-53) as instructed in paragraph 4.14.
2.
Disconnect batteries as instructed on paragraph 4.74.
Change 1
5-225
