P-9-TM-457-35
T.O. 35C2-3-442-2
TM-07464A-35
TM 5-6115-457-34
Table 8-1. Timing Plate Degree Settings
step 7. If timing dimension is not correct,
proceed to step 6.
6. If timing dimension is not cor-
rect, replace spacer (53, figure 8-3 9).
Select a spacer thickness which will cor-
rect the timing dimension. Spacers (53) are
available in varying thicknesses from 0.170
to 0.198 inch. Re-check timing dimension.
7. Install fuel injection pump as
outlined in paragraph 8-148.
8. If timing dimension is to be
checked for each cylinder, repeat step b.
following firing order of engine.
Figure 8-46. Fuel injection timing - off the engine
Change 1
8-95
