T O 35C2-3-442-2
P-8-627-34
TM-07464A-35
TM 5-6115-457-34
b. Connect the mode H relay box as-
readjustable in the range of 0-15K ohms
10 percent. Refer figure 1-16 and 1-17.
sembly to test equipment as illustrated in
procedural analysis table 6-14.
b . Removal. Refer to figure 6-15, dis-
connect all electrical plug connectors at
6-130. DISASSEMBLY. Refer to figures
mode II relay box assembly receptacles,
6-22 and 6-34 and disassemble the mode II
then remove the four screws and nuts se-
relay box in the order of index numbers
curing the assembly in position. Remove
assigned. Pay particular attention to the
the mode II relay box assembly.
following.
6-129. BENCH TEST.
NOTE
Disassemble the mode II relay
a. Refer to table 6-13 and perform a
box to the extent necessary to
continuity test of mode II relay box cir-
accomplish repair.
cuitry.
Table 6-13. Mode II Relay Box Assembly (A27) Continuity Test
6-91
Change 8
