P-8-627-34
T O 35C2-3-442-2
TM-07464A-35
TM 5-6115-457-34
NOTE
6-122. CLEANING. Clean all components
with a clean lint-free cloth moistened in
an approved cleaning solvent and dry thor-
tronic components assembly sche-
oughly.
matic and includes required values.
If the required value is not ob-
6-123. INSPECTION.
tained, replace the faulty compon-
ent.
a. Check electrical components for
6-121. DISASSEMBLY. Refer to figure
opens, shorts, continuity and proper
6-32 and disassemble the electronic com-
valves.
ponents assembly to the extent necessary
to accomplish repair. Pay particular at-
b. Inspect components for security.
tention to the following.
a. Tag, then disconnect hook-up wire.
c. Inspect wiring for defective insula-
tion and continuity.
WARNING
Avoid breathing fumes generated by
d. Inspect terminal board for cracks,
unsoldering/soldering. Eye pro-
warping, burned or discolored areas and
tection is required.
illegible stenciling.
b. Exercise care not to apply excessive
heat to components when unsoldering com-
ponents.
Change 8
6-88
