TM 9-6115-668-13
4.19 COVER AND CASE FOR CONNECTION PANEL MAINTENANCE.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Conditions
General Mechanics Tool Kit
(item 2, appendix B)
Automotive Fuel and Electrical System Repair, Tool Kit
(item 3, appendix B)
Reference
Generator Set 150 kW shut
down, paragraph 2.5.2
REMOVAL
1.
Remove six screws (21, figure 4-27), six serrated lock washers (22), six washers (23), attachment
rail (24), and rubber flap (25) from case (26).
2.
Remove ten screws (20), ten serrated lock washers (19), and ten washers (18) from the sides and
bottom of case (26).
3.
Remove case (26), protection profile (27), and sealing ring (28) from unit hood assembly (1).
INSTALLATION
1.
Install case (26), protection profile (27), and sealing ring (28) on unit hood assembly (1).
2.
Install ten screws (20), ten serrated lock washers (19), and ten washers (18) into ten holes on the
sides and bottom of case (26).
3.
Align rubber flap (25), and attachment rail (24) on case (26), and secure with six screws (21), six
serrated washers (28), and six washers (23) onto hood assembly (1).
4.
Install six screws (21), six serrated lock washers (22), and washers (23) on unit hood assembly (1).
4-53
