TM 9-6115-668-13
4.16 SUPPLY AIR DUCT MAINTENANCE.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Conditions
General Mechanic’s Tool Kit
(item 2, appendix B)
Automotive Fuel and Electrical System Repair, Tool Kit
(item 3, appendix B)
Reference
Generator Set 150 kW shut
down, paragraph 2.5.2
REMOVAL
1.
Loosen twelve screws (5, figure 4-27), twelve serrated lock washers (6), and twelve washers (7)
from supply air duct (4).
2.
Remove supply air duct (4), sealing ring (3), and rubber seal (2) from unit hood assembly (1).
INSTALLATION
1.
Place supply air duct (4), sealing ring (3) and rubber seal (2), on unit hood assembly (1).
2.
Install twelve screws (5), twelve washers (7) and twelve serrated lock washers (6), on unit hood
assembly (1).
4 - 5 0
