TM 9-6115-668-13
4.18 AIR COOLING INLET GRATE MAINTENANCE.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Conditions
General Mechanics Tool Kit
Reference
(item 2, appendix B)
Generator Set 150 kW shut
Automotive Fuel and Electrical System Repair, Tool Kit
down, paragraph 2.5.2
(item 3, appendix B)
REMOVAL
1.
Remove eight screws (13, figure 4-27), eight serrated lock washers (14), and eight washers (15)
from unit hood assembly (1).
2.
Remove air cooling inlet grate (16), and sealing ring (17) from unit hood assembly (1).
INSTALLATION
1.
Place air cooling inlet grate (16), and sealing ring (17) on unit hood assembly (1).
2.
Install eight screws (13), eight serrated lock washers (14), and eight washers (15) on unit hood as-
sembly (1).
4 - 5 2