TM 9-6115-668-13
4.21 GAS-CYLINDER AND PROP MAINTENANCE.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Conditions
General Mechanic’s Tool Kit
Reference
(item 2, appendix B)
Generator Set 150 kW shut
Automotive Fuel and Electrical System Repair, Tool Kit
down, paragraph 2.5.2
(item 3, appendix B)
REMOVAL
1.
Open flap (2, figure 4-28).
2.
Remove retaining ring (5) and washer (6) from bolt (4).
3.
Remove nut (10) while retaining bolt (7).
4.
Remove retaining ring (9) and spacer (8) from bolt (7).
5.
Remove prop (11) from bolt (7) and remove gas-cylinder (3) from unit hood assembly (1).
INSTALLATION
1.
Install gas-cylinder (3) on unit hood (1) and prop (11) on bolt (7).
2.
Install spacer (8) and retaining ring (9) on bolt (7).
3.
Install nut (10) onto bolt (7) while holding bolt (7) with a suitable wrench.
4.
Close flap (2).
4-56
