TM 9-6115-668-13
4.17 AIR LEADING DUCT MAINTENANCE.
This task covers:
a. Removal
b. Installation
INITlAL SETUP
Tools
Equipment Conditions
General Mechanic’s Tool Kit
Reference
(item 2, appendix B)
Generator Set 150 kW shut
Automotive Fuel and Electrical System Repair, Tool Kit
down, paragraph 2.5.2
(item 3, appendix B)
REMOVAL
N O T E
For air leading duct on opposite side, proceed as described here.
1.
Remove twelve screws (10, figure 4-27), twelve serrated lock washers (11), and twelve washers
(12) from unit hood assembly (1)
2.
Remove air leading duct (9), and sealing ring (8) from unit hood assembly (1).
INSTALLATION
1.
Place air leading duct (9), and sealing ring (8) on unit hood (1).
2.
Install twelve screws (10), twelve serrated lock washers (11), and twelve washers (12) on unit hood
(1).
4-51
