TM5-6115-634-14&P
NAVFAC P-8-647-14&P
T0-35C2-3-445-14
TM-6115-14&P/1
MAINTENANCE OF THE WIRING HARNESSES
5-20.
TEST AND REPLACE REMOTE FUNCTIONS BOX ASSEMBLY TO CONNECTOR PANEL
WIRING HARNESS
This task covers: a. Removal
c. Repair
b. Test
d. Installation
INITIAL SETUP
Tools
Equipment Conditions:
Reference
General Mechanic’s Tool Kit
Para. 4-9 General Instructions.
5180-00-177-7033
Materials/Parts
To avoid short circuits whi
Multimeter
General Safety Instructions
6625-01-139-2512
ch could
Wiring Harness
damage equipment or injure personnel,
97403-13228E191O
Connector, Socket
always disconnect negative battery
96906-MS3456W24-28S
cable before performing maintnenace
Connector Elec.
on the electrical system.
81349-D38999/24FH21S
REMOVAL
REMOVE WIRING HARNESS.
a.
Disconnect P29B (1) connector
on wiring harness (2) at the
remote functions box assembly
(3) from J29B (4).
b.
Remove the nut from connector
J29C and remove the cable
connector from the connector
plate (5).
TEST WIRING HARNESS.
a.
Use the wire running list.
and a multimeter to test for
continuity from pin-to-pin.
5-29
