REMOVAL - TM-5-6115-634-14P

TEST AND REPLACE SPECIAL RELAY ASSEMBLY TO REMOTE FUNCTIONS BOX ASSEMBLY WIRING HARNESS

TM-5-6115-634-14P Power Plant AN/MJQ-16 (NSN 6115-00-033-1395) (2) MEP-002A 5 Kw 60 Hz Generator Sets M103A3 2-Wheel 2-Tire Modified Trailer Manual
Page Navigation
143

TM5-6115-634-14&P NAVFAC P-8-647-14&P T0-35C2-3-445-14 TM-6115-14&P/1 5-18. REPAIR OF POWER WIRING HARNESS (cont) REMOVAL REMOVE POWER WIRING HARNESS FROM THE LOAD TERMINAL. a. Tag and remove the wire leads from the load terminal, L1 (1), L2 (2), L3 (3) and LO (4). b. Remove the power connector J29M and the surge protectors A1, A2, A3 from the plate connec- tor. Refer to para 4-17. REPAIR REPAIR WIRING HARNESS. Use standard shop procedures when repairing the power wiring harness. INSTALLATION INSTALL THE POWER WIRING HARNESS. a. Refer to para 4-17 and install the power connector J29M and the surge protectors to the plate connector. b. Install the L1 (1), L2 (2), L3 (3) and LO (4) wire leads to the load ter- minal. NOTE FOLLOW ON MAINTENANCE: Connect Negative Battery Cable (Para. 4-10). 5-25

Privacy Statement
Press Release
Contact