REPAIR - TM-5-6115-634-14P

TEST AND REPLACE REMOTE FUNCTIONS BOX ASSEMBLY TO CONNECTOR PANEL WIRING HARNESS

TM-5-6115-634-14P Power Plant AN/MJQ-16 (NSN 6115-00-033-1395) (2) MEP-002A 5 Kw 60 Hz Generator Sets M103A3 2-Wheel 2-Tire Modified Trailer Manual
Page Navigation
146

TM5-6115-634-14&P NAVFAC P-8-647-14&P T0-35C2-3-445-14 TM-6115-14&P/1 5-19. TEST AND REPLACE SPECIAL RELAY ASSEMBLY TO REMOTE FUNCTIONS BOX ASSEMBLY WIRING HARNESS (cont) b. c. REPAIR Use a multimeter and test for open circuit between pins and pin-to-connector. When opens or shorts occur, repair wiring harness. REPAIR WIRING HARNESS. a. Use standard shop procedures when repairing the wiring harness. b. If not repairable, fabricate (see Appendix G). INSTALLATION INSTALL WIRING HARNESS. a. Connect P29A (1) connector to the remote functions box assembly (2) at J29A (3). b. Install connectors P29 (4) and PA (5) to the special relay box (6) at J29 (7) and JA (8). NOTE FOLLOW ON MAINTENANCE: Connect Negative Battery Cable (Para. 4-10). 5-28

Privacy Statement
Press Release
Contact