TM5-6115-634-14&P
NAVFAC P-8-647-14&P
T0-35C2-3-445-14
TM-6115-14&P/1
5-20.
TEST AND REPLACE REMOTE FUNCTIONS BOX ASSEMBLY TO CONNECTOR PANEL
WIRING HARNESS (cont)
b.
Use a multimeter and test for
open circuit between pins and
pin-to-connector.
c.
When opens or shorts occur,
repair wiring harness.
REPAIR
REPAIR WIRING HARNESS.
a. Use standard shop procedures
when repairing the wiring
harness.
b.
If not repairable, fabricate
(see Appendix G).
INSTALLATION
INSTALL WIRING HARNESS.
a. Install connector P29B (1) onto
the remote functions box
assembly (3) at J29B (4).
b.
Install the cable connector in
the connector plate (5) and
replace the nut on connector
J29C .
NOTE
FOLLOW ON MAINTENANCE:
Negative Battery Cable
4-10).
Connect
(Para.
5-31
