Figure 3-4. Fuel Tank

Figure 3-5. Shutter and Thermo Power Element Assembly

TM-5-6115-584-12 Generator Set Diesel Engine Driven Tactical Skid Mtd. 30 Kw 3 Phase 4 Wire 120/208 and 240/416 Volts Manual
Page Navigation
33

TM 5-6115-584-12 NAVFAC P-8-622-12 TO-35C2-3-456-1 TM-05682C-12 1. Strap (2) 2. Nut (4) 5. Fitting (3) 8. Filler cap 3. Flatwasher (4) 6. Fuel level gauge 9. Drain valve 4. Fuel tank 7. Float switch 10. Skid-base TS 6115-584-12/3-4 Figure 3-4. Fuel Tank (2) Bracket Assembly. Check bracket assembly flat and straight. Check to see that shutters close se- (1) for secure mounting to shutter (4) and shutter box (10). Brackets (11) should turn freely on bearings (12) curely and that they can be easily opened by hand. without excessive play. (4) Thermo Power Unit. Check thermo power unit (7) located on inside of shutter assembly to see that (3) Shutters. Check shutters (4) to see that they it is free of dirt, grease, or physical damage. Notify higher level of maintenance for replacement of thermo are free of dirt or grease. Check to see shutters are power unit. 3-11

Privacy Statement
Press Release
Contact