• Figure  4-24.  Testing   Battery   Charging   Regulator/Rectifier   Assembly
    Section XI. 4-29.  FUNCTION  AND  DESCRIPTION The  diesel  engine  has  pressure  Iubrication  to  all working   parts   (see   figure   4-27).   The   oil   system includes oil intake cup, gear type oil pump, bypass valve,  oil  pressure  gauge,  low  oil  pressure  shutoff, full-flow  oil  filter,  oil  coder,  and  passages  to  de- liver oil throughout the engine. Oil is held in the oil base, and forced through the oil filter and oil cooler by  the  pump.  Lines  leading  to  the  rocker  housing, passages through the block to crankshaft and front camshaft  bearing,  crankshaft  passages  to  connecting rod bearings and connecting rod passages to piston pin  bushings  complete  the  oil  system  network  The bypass valve controls oil pressure by allowtng excess oil to flow directly back to the crankcase. 4-30. OIL COOLER a. Inspect (see  figure 4-28). On ASK equipped generators, remove ASK cover assembly (para 5-3). Inspect oil cooler (1) for physical damage. Visually check for leaks where oil cooler is connected to oil hoses (figure 4-29). Check that cooler Is securely  fastened  to  mounting  plate  (2,  figure  4-28)  and  that plate is securely fastened to engine. Inspect all hoses for Figure 4-26. Adjusting Starter Lockout Switch MAINTENANCE OF OIL SYSTEM

    TM-5-6115-584-12 Generator Set Diesel Engine Driven Tactical Skid Mtd. 30 Kw 3 Phase 4 Wire 120/208 and 240/416 Volts Manual
    Page Navigation
      84    85    86    87    88  89  90    91    92    93    94  

    Privacy Statement
    Press Release
    Contact

    © Copyright Integrated Publishing, Inc.. All Rights Reserved.

    		Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business