T O 35C2-3-442-2
P-8-627-34
TM 5-6115-457-34
TM-07464A-35
Legend to figure 8-39:
Plunger
Bolt (5)
1.
Seal
52.
27.
Nut (5)
2.
Spacer (6)
53.
Seal
28.
Spring (6)
3.
54.
Plug
Lock washer (5)
29.
Washer (6)
Clamp (10)
4.
55.
Plug
30.
Lifter assembly (6)
56.
Bracket
Fuel line assembly
5.
31.
Camshaft assembly
57.
Bolt
Fuel line assembly
32.
6.
Dowel
58.
Lockwasher
Fuel line assembly
7.
33.
Sleeve
Nut
59.
Fuel line assembly
8.
34.
Camshaft
60.
Lock washer
Fuel line assembly
9.
35.
Housing assembly
61.
Bolt (4)
10.
Fuel line assembly
36.
Bearing
62.
Lock washer (4)
Seal assembly (6)
37.
11.
Bearing
63.
Bolt (2)
Seal (6)
38.
12.
Pin (3)
64.
Lock washer (2)
Valve assembly (6)
13.
39.
Bearing
65.
Fuel regulator rack
40.
14.
Nut
Plug
Felt washer (6)
66.
41.
Body
15.
Bearing
Bushing (6)
67.
Nozzle assembly
16.
42.
Bearing
Seal (6)
68.
43.
17.
Bolt
Ball (6)
Bonnet (6)
69.
Lock washer
44.
18.
Dowel (6)
Retainer ring (6)
70.
Bolt
45.
19.
Ball (6)
Spring (6)
71.
46.
20.
Lock washer
Dowel (6)
Check valve (6)
72.
Bolt
47.
21.
Plunger and barrel
Plug
73.
48.
22.
Lock washer
Plug
assembly (6)
74.
23.
Bolt (2)
Dowel (2)
75.
49. Screw
24.
Lock washer (2)
Housing
76.
50. Gear
25.
Seal
51. B a r r e l
26.
Seal
8-143. DISASSEMBLY.
a clean, lint free cloth. Keep
parts for each injection pump
Refer to figure 8-39 and disassemble
separate since each pump has
fuel injection group in the order of index
matched parts that are not
numbers assigned. Pay particular attention
interchangeable.
to the following:
NOTE
b. Using a suitable extracting tool,
Tag all lines from each cylinder
remove fuel pumps items (41 through 55,
for ease of assembly.
a. Prior to disassembly of the valve
assemblies (13) and the fuel injection pumps,
c. Fuel regulator rack (40) must be
perform tests outlined in paragraph 8-149,
removed before removing lifters (56).
step a.
d. Using a suitable driver, remove
CAUTION
bearings (67 and 68).
All service work should be done at
a cleaning facility. Hands should
e. Using a suitable removal tool,
be clean and disassembly done on
remove camshaft bearing (63).
8-89
Change 8
