Figure 8-37. Installing fuel rack setting gauge

T.O. 35C2-3-442-2

P-9-TM-457-35

TM-07464A-35

TM 5-6115-457-34

10. Check to see that locknut (2,

from edge of lever (18) when viewed in the

position shown.

figure 8-34) is secure, apply cap (1), and

tighten. Secure with safety wire.

NOTE

c. UTILITY GOVERNOR ADJUST-

This setting is nominal. Additional

MENT - OFF UNIT. Set utility governor

adjustment may have to be made.

droop setting prior to installation on the

Refer to paragraph 8-237 for final

engine. Refer to figure 8-38 and set droop

adjustments during engine operation.

adjust bracket (11, figure 8-33) 0.187 inch

8-84