T O 35C2-3-442-2
P-9-TM-457-35
TM 5-6115-457-34
TM-07464A-35
Legend to figure 8-34:
27.
Bushing
Cap
1.
28.
Stud
2.
Locknut
Shaft
29.
Lock washer
3.
Snap ring (2)
30.
Washer
4.
31.
Bolt
Threaded rod
5.
32.
Lock washer
6.
Rack extension
Shaft
33,
Spring
7.
34.
Coupling
8.
Drive coupling (ref)
35.
Spring
Bolt
9.
36.
Bolt (2)
Lockplate
10.
37.
Lockplate (2)
Bolt
11.
38.
Lever
12.
Lockplate
39.
Lever
13.
Plate assembly
40.
Bolt (2)
Ball
14.
41,
Lockplate (2)
Bushing
15.
42,
Plate
16.
Plate
43.
Pin
Gear
17.
44.
Handle
18.
Gear assembly
45.
Housing assembly
19.
Bushing
46.
Stud (4)
20.
Gear
47.
Dowel (2)
Bolt
21.
48.
Pin
22.
Lockplate
49.
Housing subassembly
23.
Gear
50.
Seal (2)
24.
Gasket
51.
Bushing (4)
25.
Cover plate assembly
52.
Housing
26.
Cover plate
c . Inspect DC solenoid valve
6. I n s p e c t rod ends (4, figure
f o r worn or defective parts and valve for
8-31 and 6, figure 8-31A) for freedom of
freedom of movement. Replace worn or
movement of the ball within the housing
defective part.
s o c k e t . Replace rod ends that bind.
d . Check for proper voltage
7. I n s p e c t governor return spring
( 2 7 , figure 8-31) for cracked coils and
24 VDC at solenoid terminals.
t h e extremities (21) for worn/elongated
b . GOVERNOR DRIVE HOUSING.
1. I n s p e c t bushings (15, 19,
h o l e s . Replace defective spring assembly.
a n d 27, figure 8-34) for scoring,
8. Inspect overspeed shutdown
e x c e s s i v e wear, and other damage. Re-
d e v i c e for worn or defective parts and
place worn bushings.
linkage for freedom of movement. Replace
2. I n s p e c t drive gears (20 and
w o r n or defective parts.
2 3 ) for excessively worn gear teeth.
9. Discard gaskets (7 and 61,
3. I n s p e c t shaft (29) for wear.
C h e c k to see that all four oil holes are
10. DC Solenoid - Refer to
open and clean.
F i g u r e 8-31.
4. I n s p e c t shaft bushings (51)
a . Check DC solenoid for
for excessive wear and for grooving.
l o o s e connection.
R e p l a c e defective bushings.
5. D i s c a r d gaskets (24) and
b . C h e c k for foreign mater-
s e a l s (50).
i a l causing poor electrical connection.
8-79
Change 6
