1
Manifold
12
Core assembly
2
Gasket
13
Collector manifold
3
Capscrew
14
Clip
4
Gasket
15
Gasket
5
Elbow
16
Front bonnet
6
Flange
17
Gasket
8
Preformed packing
18
Hose assembly
9
Rear bonnet
19
Clamp
10
Gasket
20
Gasket
11
Gasket
21
Hose assembly
Figure 3-46. Intake manifold with intercooler, disassembly and reassembly.
180F., again torque the capscrews to the
(9) Always use new gaskets and complete the
above value.
rest of the installation by a direct reversal
of the removal procedure. Tighten the
3-54. Exhaust Manifold
intake manifold capscrews to a torque of
a. General. Exhaust manifold sections are sealed
68 to 73 foot-pounds.
to each other by means of connecting sleeves, having
two seal ring grooves at each end of the sleeves.
(10) Fill the cooling system.
(11) After the engine is run and the water
with steel-
temperature
reaches
approximately
3-52
