TM 9-6115-668-13
INSTALLATION
NOTE
Installation procedure for power relay K102 is the same as for power
relay K101, described below.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Noting correct labeling and position, install cables (34) to terminals (33) on miniature relay K101
(31).
Place power relay (31) onto threaded pin (35) on mounting plate (19).
Install washer (30), serrated lock washer (29), and nut (28) on threaded pin (35).
Install washer (27), serrated lock washer (26) on threaded pin (35) and screw on spacer (25).
Install washer (24), mounting bar (23), washer (22), serrated lock washer (21), and nut (20). Tighten
nut 20.
Tighten nuts (28) and spacer (25) on threaded pin with torque wrench to the torque value refer-
enced in appendix G.
Position the four relay sockets (12) in place.
Install screws (15), serrated lock washers (14), and washers (13) into clip (10).
Insert miniature relays K103 (6), K104 (7), K105 (8) and K111 (9) into the four relay sockets (12).
10. Stow prop (5) and close front panel (4).
11. Close flap (2).
5 - 1 5 6
