TM 9-6115-668-13
CAUTION
Tighten nuts on threaded pin with torque wrench to torque values in-
dicated in table (item G.2, appendix G).
1.
Install ground terminal of varistor R8 (35), washer (38), serrated lock washer (39), and nut (40) on
threaded pin (36). Torque nut (40).
2.
Insert J2/24 V connector receptacle (31) and sealing ring (33) into front of control cabinet connec-
tion panel (9).
3.
Install nut (37) onto J2/24 V connector receptacle (31).
4.
Connect cable (34) and varistor R8 (32) to terminal (32) of J2/24 V connector receptacle (31).
5.
Stow prop (5) and close front panel (4).
6.
To install unit hood assembly refer to paragraph 4.14.
4-176
