TM 9-6115-668-13
1.
Insert J1/120 V 400 Hz double receptacle (26), with two screws (22), into front of control cabinet
connection panel (9).
2.
Install two washers (23), two serrated lock washers (24) and two nuts (25) on two screws (22).
Tighten nuts (25).
3.
Using screws (30) connect cable (27, 29) and varistor R9 (28) to terminals of J1/120 V 400 Hz
double receptacle (26).
4.
Put seal (21) and cover (19) in place and install and tighten screw (20).
5.
Install cover (43) on spacer (41) and secure with two nuts (42).
6.
Stow prop (5) and close front panel (4).
7.
To install unit hood assembly refer to paragraph 4.14.
4-174