TM 9-6115-668-13
Installation procedure for transformer T14 (6) Is the same as for trans-
former T15 (7), described below.
1.
Hook top (15) of transformer T15 (7) into mounting bar (16) and clip into place at the bottom.
2.
Noting correct labeling and position, install cables (12) on lower terminals (13) of transformer T15
(7), and tighten screws (11).
3.
Noting correct labeling and position. Install cables (8) on upper terminals (9) of transformer T15 (7),
and tighten screws (10).
4.
Stow prop (5) and close front panel (4).
5. Close flap (2).
4 - 1 4 5
