TM 9-6115-668-13
1.
2.
3.
4.
5.
Installation procedure for diode V1 (46) and diode V2 (47) Is the same
as for diode V15 (31), described below.
Hook diode V15 (31) into top (36) of mounting bar (41) and push in at the bottom.
Noting correct labeling and position, install cables (33) on lower terminals (32) of diode V15 (31)
and tighten screws (34).
Noting correct labeling and position, install cables (39) on upper terminals (38) of diode V15 (31)
and tighten screws (37).
Stow prop (5) and close front panel (4).
Close flap (2).
4 - 1 4 8
