TM 9-6115-668-13
4.62 DIODE V3 MAINTENANCE.
This task covers:
a. Removal
b. Installation
Tools
Equipment Conditions
General Mechanic’s Tool Kit
Reference
(item 2, appendix B)
Generator Set 150 kW shut
Automotive Fuel and Electrical System Repair, Tool Kit
down,
(item 3, appendix B)
paragraph 2.5.2
Materials/Parts
Thermoconductive paste (13, appendix E)
Disconnect the negative battery cable first and then the positive bat-
tery terminal cable. Failure to observe this warning could result in se-
vere personal injury or death.
Tag all cables prior to removal to ensure correct connection of the cables
during installation.
1.
Open flap (2, figure 4-53) on unit hood assembly (1).
2.
Open front panel (4) on control cabinet assembly (3) and secure with prop (5).
3.
Remove screw (13) and disconnect cables (14, 15).
4. Remove Diode V3 (12).
5.
Remove screw (11) and cables (10).
6.
Remove heat sink (9) from control cabinet by removing screws (6), serrated lockwashers (7), and
washers (8) from outside the back panel.
4 - 1 4 9
