TM 9-6115-668-13
1.
Install heat sink (9) from the front on the back panel of control cabinet.
2.
Install screws (6), serrated lock washers (7), and washers (8) from outside the back panel into the
heat sink (9).
Before securing diode V3 to heat sink, apply thermoconductive paste to
the contact surface.
3.
Install diode V3 (12) into heat sink (9).
4.
Install cables (14, 15) and (10) and secure with screws (13, 11).
5.
Stow prop (5) and close front panel (4).
6. Close flap (2).
4 - 1 5 0
