TM 9-6115-668-13
c. Use a screwdriver to push unlocking element (11) on circuit breaker F3 (8) in direction of arrow,
tilt circuit breaker F3 (8) upward and remove from mounting bar (14).
6. Circuit breaker F11 (20):
Removal procedure for circuit breaker F10/L1 (29), F10/L2 (28), F10/L3
(27) is the same as for circuit breaker F11 (20), described below.
a. Record labeling and position of cable and disconnect cable (18) from terminal (19) of circuit
breaker F11 (20).
b. Record labeling and position of cable and disconnect cable (23) from terminal of circuit breaker
F11 (20).
c. Use a screwdriver to push unlocking element (24) on circuit breaker F11 (20) in direction of ar-
row, tilt circuit breaker F11 (20) upward and remove from mounting bar (14).
1. Circuit breaker F1 (32):
Installation procedure for circuit breaker F2 (33) is the same as for cir-
cult breaker F1 (32), described below.
a. Hook top (44) of circuit breaker F1 (32) into mounting bar (14) and clip on locking element (43)
at the bottom.
b. Install busbar (31) on terminals of circuit breaker F1 (32) and F2 (33) and tighten screws (41).
c. Install cable (46) to terminal (45) of circuit breaker F1 (32) and tighten screw (40).
2. Circuit Breakers F3 (8):
installation procedure for circuit breaker F4 (34), F5 (35), F6 (36), F7
(37), F8 (38), F9 (39) is the same as for circuit breaker F3 (32), described
below.
a. Hook top (13) of circuit breaker F3 (8) into mounting bar (14) and clip on locking element (12) at
the bottom.
b. Install busbar (30) on terminals of circuit breakers F3 (8) and F4 (34) to F9 (39) and tighten
screws (10).
c. Install cable (6) to terminal (7) of circuit breaker F3 (8).
3. Circuit breaker F11 (20):
4 - 1 5 3
