TM5-6115-593-34
NAVFAC P-8-631-34
TO-35C2-3-463-2
Figure 11-4. Air Cleaner Assembly Removal
(d)
Check the Flywheel Housing Runout. Mount the
base of a dial indicator on the flywheel and position
the finger of the indicator on the machined surface
of the flywheel housing (bellhousing) which bolts to
the generator adapter. (See figure 11-8.) Set the
dial indicator to zero. Turn the engine through one
complete revolution. Total indicator reading should
not exceed 0.006 inch (0.15 mm). If reading
exceeds the allowable limit, excessive vibration
could result.
11-14
