Figure 2-12. Electric Winterization Kit. Operating Instructions (Sheet 2 of 2)

Figure 2-12. Electric Winterization Kit, Operating Instructions (Sheet 1 of 2)

Section VI. OPERATION OF AUXILIARY MATERIAL USED IN CONJUNCTION WITH THE EQUIPMENT

TM-5-6115-545-12 Power Unit Utility Pack Gas Turbine Engine Driven (Air Research Model PPU85-5) Non-Winterized and (Air Research Model PPU85-4) Winterized Manual
Page Navigation
79

E - ELECTRIC HEATER CONTROL BOX STEP 4. CLOSE CIRCUIT BREAKER (E) AND SET ON-OFF SWITCH TO ON, CHECK THAT POWER ON AND HEATER ON INDICATORS LIGHT. STEP 5. COOLANT IS NOW BEING HEATED AND PUMP IS OPERATING. STOPPING STEP 1. SET ON-OFF SWITCH TO OFF AND OPEN CIRCUIT BREAKER. POWER ON AND HEATER ON INDICATORS SHOULD BE EXTINGUISHED. STEP 2. PLACE COOLANT SELECTOR VALVE (A) HANDLE (IN 9-O’CLOCK POSITION) POINTING DIRECTLY AWAY FROM FUEL BURNING HEATER. Figure 2-12. Electric Winterization Kit. Operating Instructions (Sheet 2 of 2) 2-31

Privacy Statement
Press Release
Contact