Total Circuit Voltage Test
(d) Correct any discrepancies before pro-
ceeding with operational tests.
(a) Check voltage at V3 as shown in
(e) If voltage indicated is equal to voltage
V1, test alternator negative output circuit as direct-
ed in step (5) below.
(b) If voltage is zero, check fuse (11,
(5) Test alternator output circuit as follows:
(a) Check voltage V4 as indicated in figure
(c) If voltage is greater than zero, but
conditions between battery positive terminal and al-
(b) If voltage is below voltage at V1 (figure
ternator positive output terminal.
3-7), check for inadequate circuit conditions between