T O 35C2-3-442-2
P-8-627-34
TM 5-6115-457-34
TM-07464A-35
NOTES:
1. COIL DATA:
A. WIRE SIZE: 0.057 DIA (#15GA), CLASS 155, TYPE L2.
B. NUMBER OF POLES: 6
c . NUMBER OF TURNS PER COIL: 85
2. STATOR WINDING PROCEDURE:
A. INSULATE STATOR CORE, INDEX 1, COMPLETE USING INSULATION PLATE, INDEX 3, AND
SLOT CELL INSULATION, INDEX 4 AND INDEX 9.
B. WIND STATOR COMPLETE, 6 COILS CONNECTED IN SERIES.
c . CONNECT LEADS, INDEX 5, TO COILS, SEE DETAIL A, HOMOGENEOUS WELD.
D. APPLY SLEEVING, INDEX 6.
E. TIE LEADS AND ENDLOOPS WITH TAPE, INDEX 7.
3. VARNISH, REFER TO FIGURE 7-2 NOTE 3.
4. STAMP PART NUMBER AS SHOWN BELOW PER MIL-STD-130, 0.12 MIN HEIGHT, USING WHITE
ENAMEL PAINT
30554 ASSY 70-4514
MFG (MFG CODE)
5. AFTER REWINDING, PERFORM INSPECTION SPECIFIED IN PARAGRAPH 7-5, STEPS N AND R.
Legend to figure 7-8:
7. Untreated glass tape
4. Slot cell insulation (6)
1. Stator core
0.010X0.75
5. Lead (2)
2. Magnet wire
8 . Varnish
6. Insulation sleeving
0.057 DIA (#15)
9. Slot cell insulation (6)
0.330 ID
3. Insulation plate (6)
Change 8
7-22
