T O 35C2-3-442-2
P-8-627-34
TM 5-6115-457-34
TM-07464A-35
CHAPTER 8
ENGINE GROUP REPAIR INSTRUCTIONS
Section I. ENGINE COMPONENTS
7.
Lubricating oil filters
8-1.
GENERAL.
8. Secondary fuel filter and relief
The engine is a six cylinder, 4 cycle,
valve
turbo charged, overhead valve diesel. Com-
ponents covered in this chapter, in addition
9 . Breather assembly
to the basic engine, are those which are
mounted on the engine block.
10. Hydraulic filter (precise sets
only)
8-2.
REMOVAL.
11. Atomizer tube, atomizer and
Refer to paragraph 2-8 and remove
bushing.
the engine group.
DISASSEMBLY.
c. Remove oil pan shutoff cock.
8-3.
d. Remove four screws and lockwashers
a. Tag and remove all hydraulic and
fuel lines from engine. Cap lines and plug
securing two flywheel housing supports.
all openings.
e. Remove components and disassemble
engine as specified in subsequent sections
b. Refer to Operator and Organizational
of this c h a p t e r .
Maintenance Manual and remove the follow-
ing.
8-4.
REASSEMBLY.
1. Alternator and fan drive belts
a . Replace components and reassemble
engine as specified in subsequent sections
2 . Alternator assembly
of this c h a p t e r .
3. Fuel day tank
b. Install two flywheel housing sup-
ports and secure with four screws and
4. Manual speed controls
5. Fuel filter and pump assembly,
c. Install oil pan shutoff cock.
threaded spacers and adapter.
d. Refer to Operator and Organizational
Maintenance Manual and install the follow-
6 . Starter motor
ing.
Change 8
8-1
