TM 9-6115-668-13
INSTALLATION
1.
Install oil hose (14) on fitting (13) with clamps (12) and tighten clamps (12).
2.
Insert oil pump (15) and air-oil-heat exchanger (20) together into heat exchanger box (23).
3.
Install three screws (2), three washers (3), three washers (7), three serrated lock washers (8), and
three nuts (9) on brackets (4). Tighten nuts (9).
4.
Install oil hose (16) on fitting (19) with clamps (17, 18) and tighten clamps.
5.
Install oil hose (5) with clamps (6) on oil pump (15) and tighten clamps.
6.
Install air hose (21) with clamp (22) on heat exchanger box (23) and tighten clamp.
7.
Refill oil as instructed in paragraph 2.3.2.3.
8.
Insert plug connector J103 (10) with cable on electric oil pump (15).
9.
Place cover (35) on heat exchanger box (23).
10. Install six screws (32), six serrated lock washers (33) and six washers (34).
11. Install air hose (37) with clamp (36) on cover (35) and tighten clamp.
12. Install unit hood assembly (1) as instructed in paragraph 4.14.
5-189
