TM 9-6115-668-13
1.
2.
3.
4.
5.
6.
7.
8.
9.
Slide oil hose (8) into air hose (23).
Install oil hose (8) with clamps (16) on fitting on oil pump (15) and tighten clamps (16).
Install oil hose (8) with clamps (7) on nipple (6) on oil pan and tighten clamps (7).
Install screw (17), washer (18) through clamp (19) and bottom plate of base frame, washer (20),
serrated lock washer (21), and nut (22). Tighten nut (22).
Install air hose (21) with clamp (24) on fitting of heat exchanger box (25) and tighten clamp (24).
Install cover (32) with six screws (31) six serrated lock washers (30) and six washers (29). Tighten
screws (31).
Slide oil hose (4) into heat exchanger box (20).
Install oil hose (4) with clamps (3) on T-junction on oil filler neck (2) and tighten clamps (3).
Install oil hose (4) with clamps (27) on fitting (28) of air-oil heat exchanger (26) and tighten clamps
(27).
10. Refill oil as instructed in paragraph 2.3.2.3.
11. Install unit hood assembly (1) as instructed in paragraph 4.14.
5 - 1 9 4
