TM 9-6115-668-13
5.39 OIL HOSE MAINTENANCE.
This task covers:
a. Removal
b. Installation
Tools
Equipment Conditions
General Mechanic’s Tool Kit
Reference
(item 2, appendix B)
Generator Set 150 kW shut
Automotive Fuel and Electrical System Repair, Tool Kit
down,
(item 3, appendix B)
paragraph 2.5.2
1.
Remove unit hood assembly (1, figure 5-47) as instructed in paragraph 4.14.
2.
Pump out oil with scavenge pump as instructed in paragraph 2.3.2.3.
3.
Remove six screws (31), six serrated lock washers (30), and six washers (29).
4.
Remove cover (32) with air hose (33) from heat exchanger box (25) and set to one side.
5.
Remove nut (22), serrated lock washer (21), washer (20), washer (18), screw (17) from clamp (19).
6.
Loosen clamp (24) and pull air hose (23) off fitting of heat exchanger box (25) and pull air hose (23)
back and secure.
C A U T I O N
Use a container and/or rags to collect oil that emerges when hose
is pulled off.
Plug oil hose with stoppers or rags.
7.
Loosen clamp (7) and remove oil hose (8), off nipple (6) on oil pan.
8.
Loosen clamps (16) and remove oil hose (8) from fitting on oil pump (15).
9.
Pull oil hose (8) out of air hose (23).
C A U T I O N
Use a container and/or rags to collect oil that emerges when hose
is pulled off.
Plug oil hose with stoppers or rags.
10. Loosen clamps (27) and pull oil hose (4) off fitting (28).
11. Loosen clamp (3) and pull oil hose (4) off T-junction on oil filler neck (2).
12. Pull other end of oil hose (4) from heat exchanger box (25).
5 - 1 9 3
