5.40 OIL TEMPERATURE SWITCH MAINTENANCE.

TM-9-6115-668-13 5Kw 28VDC Auxiliary Power Unit (APU) MEP 952B Manual
Page Navigation
523

TM 9-6115-668-13 5.40 OIL TEMPERATURE SWITCH MAINTENANCE. This task covers: a. Removal b. Installation Tools Equipment Conditions General Mechanic’s Tool Kit Reference (item 2, appendix B) Generator Set 150 kW shut Automotive Fuel and Electrical System Repair, Tool Kit down, (item 3, appendix B) paragraph 2.5.2 Materials/Parts Cable ties (item 10, appendix E) Thermoconductive paste (item 13, appendix E) WARNING Disconnect the negative battery cable first and then the positive bat- tery terminal cable. Failure to observe this warning could result in se- vere personal injury or death. C A U T I O N Tag all cables prior to removal to ensure correct connection of the cables during installation. 1. Remove unit hood assembly (1, figure 5-47). 2. Unplug cable X 104 at receptacle (13). 3. Remove flat terminal (14) from receptacle (13) of the switch to be changed, (10) for S 103 and (9) for S 104. NOTE Care must be exercised to Insure the proper wire is selected. 4. Cut cable tie (11) and remove. 5. Cut the flat terminal (14) from the cable removed from plug (13) and remove from insulation (12). 6. Remove temperature switch S 103 (10) or S 104(9) from hose connector fitting (5). 5 - 1 9 5

Privacy Statement
Press Release
Contact