TM 9-6115-668-13
d. Install washer (49), serrated lock washer (50), and nut (51).
e. Install screws (16) through flange and bottom plate of base frame (2).
f. Holding four screws (16), install four serrated lock washers (12) and four nuts (11). Tighten nuts
(11).
g. Align exhaust pipe with header (10), gaskets (13, 14), silencer (28), elbow (15), and endpipe
(46), and tighten nuts (11) in a crosswise pattern.
h. Tighten nuts (51, 39, 27).
5.
Install unit hood assembly (1) as instructed in paragraph 4.14.
4-208
