TM 9-6115-668-13
4.86 OIL LINE ASSEMBLY MAINTENANCE.
This task covers:
a. Removal
b. Installation
Tools
Equipment Conditions
General Mechanic’s Tool Kit
Reference
(item 2, appendix B)
Generator Set 150 kW shut
Automotive Fuel and Electrical System Repair, Tool Kit
down,
(item 3, appendix B)
paragraph 2.5.2
Materials/Parts
Sealing rings
Sealing tape
(item 19, appendix E)
1.
Open flap (2, figure 4-65) on unit hood assembly (1).
CAUTION
Place a container underneath diesel engine.
2.
Pump out oil as instructed in paragraph 2.3.2.3.
3.
Unscrew collar nut (11) and remove oil line (17) from shutoff valve (18).
4.
Remove hollow screw (15), sealing rings (14, 16) and oil line (17) from adapter (13). Discard sealing
rings.
NOTE
When replacing the engine, remove adapter (13) and replace with a
screw. Set adapter (13) aside for re-use.
1.
Install new sealing rings (14, 16) and oil line (17) on hollow screw (15).
2.
Install hollow screw into adapter (13).
3.
Install oil line (17) on shutoff valve (18) and screw on collar nut (11).
4.
Refill with oil as instructed in paragraph 2.3.2.3.
5. Close flap (2).
4-213
