TM 9-6115-659-13&P
5-21 AN/MJQ-35 TRAILER LIFTING BRACKET MAINTENANCE.
This task covers:
a. Removal
b.
Installation
INITIAL SETUP
Tools
Tool Kit, General Mechanic’s
(item 1, appendix)
Jack Stands (item 2, appendix B)
Materials/Parts
Nuts, Self-locking
Equipment Conditions
Reference
Trailer handbrakes set, front support
leg/landing leg lowered, and rear
leveling-support jack lowered paragraph
2-3.2.1.
Front generator set removed (if front lifting
bracket is being removed); paragraph 5-6.
Rear generator set removed (if rear lifting
bracket is being removed); paragraph 5-6.
Equipment Conditions - continued
Rear mounting rails removed (if rear lifting
bracket is being replaced); paragraph 5-10.
Accessory box removed (if front lifting bracket
is being replaced), paragraph 4-19.
Front mounting rails removed (if front lifting
bracket is being replaced), para 5-10.
Personnel Required
Two
REMOVAL
1. REMOVE FRONT LIFTING BRACKET.
NOTE
If replacing front lifting bracket, proceed to step a. If removing front lifting
bracket, proceed to step b.
a. Remove lifting rings (paragraph 4-21).
Rear of trailer must be supported with jack stands to prevent trailer from
tipping. Failure to observe this warning could result in severe personal injury
or death.
b. Separate the power cable from front lifting bracket (2) by removing nut (20, figure 5-24 flat washer
(19), and screw (18) from cable clamp (21).
5-47
