TM 9-6115-659-13&P
Figure 4-27. Rear Leveling-Support Jack Replacement, 1 Ton Trailer.
REPAIR
WARNING
Before removing trailer rear leveling-support jack, support rear of trailer with jack stands.
Failure to observe this WARNING can cause severe personal injury or death.
NOTE
Disassemble the trailer rear leveling-support jack only to the extent necessary to replace
worn, defective, or damaged parts.
1.
Disassemble trailer rear leveling-support jack.
a.
Clamp leg assembly in a vise with spring pin (2, Figure 4-27) facing up.
b.
Drive the spring pin (2) out of upper leg (1) and remove leg base (4).
c.
If defective, remove lubrication fitting (3).
d.
Inspect upper leg (1) and leg base (4) for damage. If either needs to be replaced, replace entire trailer rear
leveling-support jack.
Change 2 4-57
