TM 9-6115-659-13&P
4-28
PU-797A AND AN/MJQ-35A GROUND STUD REPLACEMENT.
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Tools
Tool Kit, General Mechanic’s
(item 1, appendix B)
Materials/Parts
Washer, Lock (item 4, appendix I)
Equipment Conditions
Reference
Trailer handbrakes set and front support leg/landing leg
lowered; paragraph 2-3.2.1.
Both generator sets shut down; paragraph 2-5.3.3
REMOVAL
NOTE
Figure 2-8 contains location of ground stud.
1.
Loosen nut (1, figure 4-29) and remove ground wire (2) from ground stud (3).
2.
Remove nut (4), lock washer (5), flat washer (6), and ground stud(3).
INSTALLATION
1.
Install ground stud (3), flat washer (6), lock washer (5), and nut (4). Tighten nut (4).
2.
Install ground wire (2) in slot of ground stud (3) and tighten nut (1).
Figure 4-29. PU-797A and AN/MJQ-35A Ground Stud Replacement.
Change 2 4-59
