TM 9-6115-658-13&P 4-22 4-14  LIGHT/LAMP ASSEMBLY MAINTENANCE. This task covers: a.  Test     c.  Repair b.  Removal d.  Installation INITIAL SETUP Tools   Equipment Conditions Tool Kit, General Mechanic’s Reference (item 1, Appendix B) Soldering Gun GT7A-3 Both generator sets shut down. paragraph 2-5.3.3. Hand Operated Terminal Crimping Tool Switch box cover open. Materials/Parts Insulation Sleeving, Heat Shrinkable Solder TEST 1.  Measure for continuity between terminals (5, Figure 4-11).  If continuity exists, replace lamp housing. 2.   Measure for continuity of indicator light assembly leads (7) between terminals (5 and 8) in accordance with Table 4-2. Figure 4-11.  Light/Lamp Assembly.