TM 9-6115-658-13&P
4-47
4-26 REEL, CABLE AND BRACKET, REEL MAINTENANCE.
This task covers:
a.
Removal
b. Installation
INITIAL SETUP
Tools
Equipment Conditions
Tool Kit, General Mechanic's
Reference
(item 1, Appendix B)
Trailer handbrakes set and front support
Materials/Parts
leg/landing leg lowered; paragraph 2-3.2.1.
Washer, Lock
Both generator sets shut down; paragraph
2-5.3.3.
REMOVAL
1. Remove shaft (11, Figure 4-26), spacer (1) and remove cable reel (2) from mount (4).
2. Remove four nuts (6), flat washers (5), and bolts (3), and remove mount (4) from fender (7).
3. Drill out rivet (8) from web strap (9), and remove metal tip (10).
INSTALLATION
1. Install rivet (8) through web strap (9) with metal tip (10) on to mount (4).
2. Place mount (4) on fender (7). Install bolts (3) flat washers (5), replace and tighten nuts (6).
3. Replace cable reel (2), spacer (1) and screw in shaft (11) into mount (4).
