TM 9-6115-658-13&P
4-44
Figure 4-23. Jack, Leveling Support Replacement, 1 Ton Trailer.
REPAIR
Before removing trailer rear leveling-support jack, support rear of trailer
with jack stands. Failure to observe this warning can cause severe
personal injury or death.
NOTE
Disassemble the trailer rear leveling-support jack only to the extent
necessary to replace worn, defective, or damaged parts.
1. Disassemble trailer rear leveling-support jack.
a. Clamp leg assembly in a vise with spring pin (2, Figure 4-24) facing up.
b. Drive the spring pin (2) out of upper leg (1) and remove leg base (4).
c. If defective, remove lubrication fitting (3).
d. Inspect upper leg (1) and leg base (4) for damage. If either needs to be replaced, replace entire trailer
rear leveling-support jack.
WARNING
