System Capacities and Detailed Data on Components (Continued)

System Capacities and Detailed Data on Components (Continued) - TM-9-6115-604-34_44

System Capacities and Detailed Data on Components (Continued) - TM-9-6115-604-34_46

TM-9-6115-604-34 Generator Set Diesel Engine Driven Tactical Skid Mtd 5 Kw. 1 Phase-2 Wire 1 Phase -3 Wire 3 Phase -4 Wire 120. 120/240 and 120/208 Volts Manual
Page Navigation
26

TM 9-6115-604-34 NAVFAC P-8-633-34 Table 1-5. System Capacities and Detailed Data on Components (Continued) AC ELECTRICAL POWER GENERATION AND CONTROL SYSTEM (CONTINUED) Reverse Power Relay Drawing Number: Line Voltage: Current Requirements: Trip Adjustment: Output Contacts: Contact Rating: Operating Temperature: Storage Temperature: Manufacturer: Part Number: FSCM: Synchro Check Relay Drawing Number; Sensing Voltage: Line Frequency: Time Delay: Contact Rating: Phase Angle Adjustment Range: Factory Setting: Operating Temperature: Storage Temperature: Manufacturer: Part Number: FSCM: Undervoltage Relay Drawing Number: Nominal Voltage: Type Sensing: UN Adjustment Range: Factory Setting: Operating Temperature: Storage Temperature: Contact Rating: Manufacturer: Part Number: FSCM: 80-7797 120 volts line-to-line, 3 phase, 3 wire, 50/60 Hz 0 to 5 amperes ac maximum Screwdriver adjustable 4% to 20% of the 5 ampere rating; factory set at 0.5 amperes One set normally closed, one set normally open 5 amperes resistive at 120 V ac or 28 V dc -25 to +125F (-31° to 51C) -65 to +155F (-53 to 68C) Wilmar Electronics Incorporated 710TDX 25248 80-7796 120 V ac ±15% 50 to 500 Hz Fixed at 110 milliseconds 5 amperes at 120 V ac or 28 V dc (resistive) 6 to 18 electrical degrees 10 degrees -25 to +125F (-30 to 51C) -65 to +155F (-53 to 68C) Wilmar Electronics, Incorporated 1810DB-6X 25248 80-7795 208 V ac, 3 phase, 3 wire, 50/60 Hz Lowest of the 3 phase input 145 to 208 V ac 177V ac -25 to +125F (-31° to 51C) -65 to +155F (-53 to 68C) 5 amperes at 120 V ac or 28 V dc (resistive) Wilmar Electronics, Incorporated 401-65X 25248 1-26

Privacy Statement
Press Release
Contact