Figure 4-1. Servicing the Engine Oil Filter

Section Il. REPAIR PARTS; SPECIAL TOOLS, TEST, MEASUREMENT, AND DIAGNOSTIC EQUIPMENT (TMDE); AND SPECIAL SUPPORT EQUIPMENT

Section IV. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)

TM-9-6115-464-12 Wrench Impact Hydraulic Model MV-12-140T Manual
Page Navigation
88

ARMY TM 9-6115-464-12 AIR FORCE TO 35C2-3-445-1 NAVY NAVFAC P-8-624-12 1. Drain plug 2. Center screw 3. Sealing washer 4. Cap 5. Gasket 6. Spring 7. Filter element 8. Filter body Figure 4-1. Servicing the Engine Oil Filter f. Oil Filter Service. (1) (2) (3) (4) (5) (6) (7) Thoroughly clean the oil filter casings and the surrounding area. Remove drain plug (1, Figure 4-1) and allow the oil to drain into a suitable container. Remove center screw (2) and sealing washer (3). Remove cap (4), gasket (5), spring (6), and filter element (7) from filter body (8). Discard gasket and filter element. Install replacement filter element (7) into filter body (8). Install spring (6), replacement gasket (5) and cap (4) and secure with washer (3) and center screw (2). Tighten center screw securely to prevent leaks. Install drain plug (1) and tighten securely g. Generators. The generator is a sealed unit and does not require lubrication. 4-4

Privacy Statement
Press Release
Contact