Table 3-1. Operator Troubleshooting - Continued

Table 3-1. Operator Troubleshooting - Continued - TM-9-6115-464-12_100

Table 3-1. Operator Troubleshooting - Continued - TM-9-6115-464-12_102

TM-9-6115-464-12 Wrench Impact Hydraulic Model MV-12-140T Manual
Page Navigation
83

ARMY TM 9-6115-464-12 AIR FORCE TO 35C2-3-445-1 NAVY NAVFAC P-8-624-12 Table 3-1. Operator Troubleshooting - Continued MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION 7. ENGINE KNOCKS. Step 1. Step 2. Step 3. Engine overheated. Refer to malfunction 11 of this table. Low lube oil level. Check oil level. Add oil if necessary (Lubrication order, para 3-2). Improper grade of fuel or water in fuel. Drain main fuel tank (para 3-45), fuel filters (para 3-39, 3-41) and day tank (para 3-21). Service with clean fuel (para 3-45). 8. BLACK SMOKE IN EXHAUST. Step 1. Step 2. Step 3. Improper grade of fuel. Drain main fuel tank (para 3-45), fuel filters (para 3-39, 3-41) and day tank (para 3-21). Service with clean fuel (para 3-45). Dirty air cleaner Notify higher level of maintenance. Generator set overloaded. Reduce load to rated level. 9. BLUE OR WHITE SMOKE IN EXHAUST Improper grade of fuel. Drain main fuel tank (para 3-45), 10. LOW OIL PRESSURE. fuel filters (para 3-39, 3-41) and day tank (para 3-21). Low oil level. Add oil to proper level on dipstick (para 3-2). Improper viscosity of oil. Drain crankcase and refill with oil of proper viscosity (Lubrication Order para 3-2). Step 1. Step 2. 3-14

Privacy Statement
Press Release
Contact