TM5-6115-634-14&P
NAVFAC P-8-647-14&P
T0-35C2-3-445-14
TM-6115-14&P/1
6-5.
REPLACE ISOLATORS (cont)
b.
Attach a lifting device and
lift the alternator assembly
until the isolators are clear
of the skid.
c.
Remove two nuts (12), snubing
washers (13), flat washers
(14), isolators (15) and screws
(16).
INSTALLATION
1.
INSTALL FRONT ISOLATORS.
a.
Install two screws (8), lock-
washers (9), flat washers (6),
isolators (5), snubing washers
(5), bushings (4) and nuts (3).
b.
Using lifting device, lower
engine onto skid.
c.
Install four mounting screws
(1) and Iockwashers (2).
2.
INSTALL REAR ISOLATORS.
a.
Install two screws (16),
isolators (15), flat washers
(14) snubing washers (13) and
and nuts (12).
b.
Using lifting device, lower the
alternator onto the skid.
c.
Install four screws (10) and
lockwashers (11).
NOTE
FOLLOW ON MAINTENANCE: Install
Generator Assembly (TM5-6115-464-
34, Para. 2-7).
Install Engine Assembly (TM5-6115-
464-34, Para. 2-8).
Install Front Frame (Para. 4-25).
Install Rear Housing Frame (Para.
4-21).
6-9
