INSTALLATION - TM-5-6115-634-14P

INSTALLATION (cont) - TM-5-6115-634-14P_183

TM-5-6115-634-14P Power Plant AN/MJQ-16 (NSN 6115-00-033-1395) (2) MEP-002A 5 Kw 60 Hz Generator Sets M103A3 2-Wheel 2-Tire Modified Trailer Manual
Page Navigation
158

TM-6115-634-14&P NAVFAC P-8-647-14&P T0-35C2-3-445-14 TM-6115-14&P/1 5-23. MAINTENANCE OF CURRENT TRANSFORMER ASSEMBLIES (cont) (3) Replace transformer if test steps c. (1) or (2) failed. INSTALLATION 1. INSTALL TRANSFORMER ASSEMBLIES. a. b. c. d. e. f. g. 5-40 Install two mounting brackets (21), if removed, and secure with four screws (19) and flat washers (20). Install cross-current compen- sation transformer (18) and secure with two screws (16), lockwashers (17), and nuts (15). Install instrumentation trans- former assembly (14), and secure with six screws (12) and flat washer (13). Install mounting brackets (11), if removed, and secure with four screws (9) and flat washers (10). Install current boost trans- former (8) and secure with four screws (7), lockwashers (6), and nuts (5). Route generator leads through transformer windows while observing polarity as noted during removal. See trans- former wiring table. Connect the leads to voltage reconnection board. Remove tags. Retie wire bundles through the coils. Connect electrical leads to transformer assemblies. Remove tags.

Privacy Statement
Press Release
Contact